Why Is The Gold Jewelry Processing Fee So Different?

Why is the gold jewelry processing fee so different? How is the process of gold jewelry from extraction to processing? After the molten gold is inverted, a single batching piece suitable for processing gold ornaments is presented, such as promise rings for couples and bracelets. Cut all the ring arms and bracelet arms and make separate work. Because the ring arm and bracelet arm is the most stressed and worn place to wear.

After the reverse mold, the density of gold is not enough. It is necessary to change the density of gold by a senior technician for a long time to make it stronger and more endurable. Hammering first, then honing, making the gold jewelry more delicate and smooth. Then check the inside of the jewelry, sandpaper all the dead corners, and use the grinding needle, grinding wheel, disc grinding wheel and other tools to finely polish and further shape. There is a lot of gold that cannot be recycled during the forging and polishing process, which also increases the cost. Grinding needle, grinding wheel, disc grinding wheel and other tools for fine grinding. This process is generally impossible to see in the gold making process because the loss is very large. Those gold are very difficult to recycle, and only up to 2 grams can be recovered in 10 grams.

After immersing in hydrochloric acid, it is immersed in water for rough polishing, and after taking out, it is finely polished by hand. After repeated polishing, then is embroidery, and the color is first dried before the it. Purified water is used to clean the acid on the jewelry. The purpose of the acid is to remove all trace metals such as iron and zinc from the gold surface, and to maintain the red color of the gold for a long time. It will not fade during the wearing process. Moreover, the water used in the forging process is pure water, lest the trace metals in tap water be mixed with gold. After the frying color is completed, it is cleaned again, and after the cleaning, manual fine polishing is performed again. The technician once again hand-polished and then made related to the pattern mother’s birthstone bracelet.

The sandblasting process of jewelry is not a one-time sandblasting. After the blasting is completed, the jewelry is cleaned to start the next process. Instead, the first time on the same surface is sprayed, the excess sand gold is removed, and repeated coarse and fine sandblasting is carried out to make the surface achieve a better layering. The sandblasting process need to be very careful, so it takes time and effort. After the brushing process of the jewelry is completed, the jewelry is polished by hand again, and after polishing, the wearer feels more comfortable. The main performance in the embroidery process is the sense of layering and three-dimensionality. Polishing the jewelry several times greatly increases the loss of gold, and at the same time makes the jewelry produce a smooth feel and silky texture. Then, the finished product is placed in a steam engine for high-temperature treatment and dried at a high temperature. After drying, all products will be submitted to the quality inspection. The quality inspection is not only the inspection of the fine workmanship but also the inspection of the purity of gold by the imported nuclear element gold meter. The quality inspection products are put into storage, and the unqualified products are reversed, remake. Before the test results of gold ornaments are put on the cabinet, the store manager will recheck the qualified products, and then the qualified products are weighed, labeled, and finally on the cabinet.

The above processes are cumbersome in workmanship and costly, so they are rare in the country. Some people may ask why the gold jewelry surface craft was so complicated because only in this way, the layering and three-dimensionality of the gold jewelry can be expressed. Labeling price tag because jewelry has advanced craftsmen to design and manufacture, it is to create more gold products for you on the premise of losing more cost, so the cost performance of gold jewelry is much higher than other products. That’s why the gold jewelry processing fee so different.